The Pulsar is a ceiling-mounted infrared heating unit designed for high ceiling installations/large spaces in constant use. Its striking appearance and heat efficiency make Pulsar ideal for commercial areas, shops, showrooms, sports facilities and public halls where effective, efficient heat is required, but where design is important too.
When installed in combination with modern control systems that turn the heating on just before it is required and off when you leave (or actually just before) Pulsar has successfully delivered significant cost-savings to clients compared with their existing systems (please enquire for case studies).
Each Pulsar unit produces effective, comfortable levels of heat for very low wattage. Due to the perfect radiant properties of the Pulsar design and the low wattage required by the ceramic elements to raise the surface temperature of the unit to 200°C the 1800w white Pulsar will heat a zone of 15m2 from a height of 2.8m whilst the 2400w black Pulsar will heat a zone of 20m2 from a height of 2.8m.
We at Jigsaw know this as we have tried and tested most of the competition.
2.40 kW System Rated Voltage (V) 230, Rated Current (A) 11.4, Fuse/Circuit Breaker Rating (A) 16
1.80 kW System 230v, 7.5amps, 7.5amps Breaker Rating
Surface Sheet steel, coated, black or White
Heating Element 4 x ceramic Elements
Voltage 230 Volt, 50 Hz
Electromagnetic Tolerance low emission
Protection IP 40 (installation)
Installation Suspended system This unit is to be suspended from the ceiling only and must be installed beyond the reach of people due to the high surface temperature. It must be mounted at least 3m above floor level
*A thermostat will be required to control the heater. See our range in the accessories section.